Mechanical prep for the finish.
First I changed the old nasty oil.
See if you can spot an issue?
Yup. the filter seal stayed on the motor.
Don't let that happen of you will have leaks.
I also changed the trans fluid, see the magnetic drain plug?
No worries, this is normal and really just a metal paste.
Next up are the valves.
They were close, but definitely needed adjustment. I also adjusted the rocker arm end play.
I also put in new plugs. The old ones were well worn.
Lastly, someone asked about the rear seat. It can be left off if you want. Just remove the support silver spacers.
I think if you wanted to do this, you might want to remove the lip on the back of the driver's seat for better looks.