BMWBMW

by **BchrisL** » Sat Sep 09, 2006 7:09 pm

I copied and pasted images of the fuse box layout from my service manual, and then pasted the images along with the tables on Avery labels. I used their white mailing labesl #8162.

I then peeled them off and put them on the underside of my fuse box cover.

Here is a picture of the fuse box cover, with labels applied, laying on a fresh sheet of Avery Labels that have the images printed on them.

Chris

by **Bicyclist** » Sat Sep 09, 2006 9:28 pm

OOO! Good idea! I made up individual labels for all my relays, but this is a much better idea.

by **JimVonBaden** » Sun Sep 10, 2006 1:13 am

Not bad, but try this one for the oilheads:

Cut it out, and fold it over and it fits nicely in the lid.

Jim

by **Chiba** » Sun Sep 10, 2006 9:36 pm

Jim - you posted that once before and I just wanted to say thanks - I printed it out, cut it out, and taped inside the cover of my fuse box last month!!

--chiba

by **RJP3579** » Mon Sep 11, 2006 6:41 am

chiba wrote:Jim - you posted that once before and I just wanted to say thanks - I printed it out, cut it out, and taped inside the cover of my fuse box last month!!

--chiba

Guess that answers my question. I was gonna ask if this was good for the R850 also..
Nice job..

BMWBMW

Fuse Box Labels

Fuse Box Labels

Who is online