BMWBMW

I need to replace the wires to my moto lights and will need to remove the moto light assembly from the forks. The lights appear to be mounted using the bolts that hold the brake assembly to the forks.

Can someone tell me what the torque settings are for the brake assembly mounting bolts. I have a R1150 RTP.

Thanks in advance.

jcabiles wrote:I need to replace the wires to my moto lights and will need to remove the moto light assembly from the forks. The lights appear to be mounted using the bolts that hold the brake assembly to the forks.

Can someone tell me what the torque settings are for the brake assembly mounting bolts. I have a R1150 RTP.

Thanks in advance.

Jose,

Same as the brakes: http://www.ibmwr.org/r-tech/oilheads/BM ... _Chart.pdf

Brake caliper -- front / rear 40 Nm

Jim