Centech to Switched circuit

[Yellowjacket]

I am installing a Centech Ap-2 on a K1200s, and my experience is limited to wiring directly to the battery. This time I would like to wire the 2nd section to a switched circuit so the power comes on when the key is turned on. The Centech wilI be located under the dual seat. Is there an easy spot to make this connection? Thx.

[bdimon]

Most people connect to the parking/running lights. Bring it by the Tech Day tomorrow and get help hooking it up.

[Yellowjacket]

Thx for the tip. Will take a look. Couldn't make it this Sunday. Will have to shoot for the next one.

[jskene]

The green/white wire in the alarm harness or the blue/grey tail light wire can be used to power your Centech relay.